NL2500SY / 700
By increasing the rigidity between the spindle and tool tip in the NL2500SY, vibration has been minimized, achieving the highest-quality cutting surface during turning. With an additional integrated sub-spindle, the NL2500SY has a rotation of up to 6.000 min and a maximum torque of 77.8 Nm. The NL Series features the industry’s first turret with a built-in milling motor. This revolutionary concept minimizes heat and vibration while eliminating transmission losses.
Specifications
| X-axis travel | 10.2 in | 260 mm |
|---|---|---|
| Y-axis travel | 3.9 in | 100 mm |
| Z-axis travel | 31.3 in | 795 mm |
| RPM | 4,000 | |
| Tool Holder Type | CAT40 | |
| Chuck Size | 10 in | 254 mm |
| Tool Storage Capacity | 12 | |
| Max Turning Length | 27.7 in | 705 mm |
| Part Diameter | 14.4 in | 366 mm |
| Bar Capacity | 3.1 in | 80 mm |
| Rapid traverse rate mm/m (ipm) | X, B, Z: 1,181.1 Y: 393.7 | X, Y, B: 30,000 Y: 10,000 |
| Spindle drive motor kW(hp) | 18.5/18.5/15 | 24.7/24.7/20 |
| Floor space mm (in): w x d | 122.4 in | 3 mm |
